Capacitor discharge type power supplies provide very short welding times. These limit the chance of burning or deformation of the part and allows repeatable welding of small parts.
- Welding is interlocked and will not engage if the charged voltage does not reach a preset value.
- The capacity of the condenser bank can be switched to other levels. (50% or 100%)
- Three kinds of welding wave forms can be set.
- A counter with preset functions is built into the system.
| Items | NRW-100A/NT-100A | NRW-200A/NT-200A |
|---|---|---|
| Capacitance of Condenser | 1500 μF | 3000 μF |
| Stored Energy | 1 - 100W·S(0.1 step) | 2 - 200 W·S(0.1 step) |
|
Mean Value of Maximum Output |
S 4700A 1.8ms M 3600A 3.2ms L 2200A 6.5ms |
S 5500 A 3.2ms M 4200 A 4.9 ms L 2400 A 10.5ms |
| Power Source | AC100V±10% 50/60Hz 15A | AC100 V±10% 50/60 Hz 20A |
| Dimensions (mm) | NRW-100A: 180WX424DX294H NT-100A: 160WX285DX220H |
NRW-200 A: 220WX424DX363H NT-200A: 200WX324DX272H |
| Weight | NRW-100A: ≈21kg NT-100A: ≈16kg |
NRW-200A: ≈32kg NT-200A: ≈26kg |
