A low cost constant heat manual ACF bonder with excellent alignment capabilities.
- Two alignment cameras standard (Top-down).
- Two optional alignment cameras for opaque FPCs.
- TFT monitor may be located at right, left, or top of machine.
- Constant heat unit with controller.
- Precision air cylinder with digital pressure regulator for fine pressure control.
- Y-Axis sliding stage keeps hands away from heat and pressure.
- Bonding head size: MAX 100x8mm
- Comprehensive native English manual covering set-up, process development, maintenance, and operation.
The Ito Group TTAB-1008C is a manual system designed for the alignment and bonding of ACF assemblies. It can be equipped with either two or four cameras, allowing it to precisely align even opaque multilayer FPCs to their substrates. After alignment has been completed the machine immediately goes into the final bonding process, applying the preset time/heat/pressure profile required. Load, unload, and alignment are all performed by the operator.
The TTAB-1008C is recommended for use in bonding FOG, FOB, and FOF bonding and has a recommended minimum pitch of 0.2mm when using a 0.1/0.1mm line/space configuration.
